2-ADAMANTYL METHACRYLATE
2-ADAMANTYL METHACRYLATE
CAS: 133682-15-2
Molecular Formula: C14H20O2
2-ADAMANTYL METHACRYLATE - Names and Identifiers
| Name | 2-ADAMANTYL METHACRYLATE |
| Synonyms | 2-ADAMANTYL METHACRYLATE 2-adamantyl 2-methylprop-2-enoate 2-(2-methyl)adamantyl-methacrylate 2-methyl-2-propenoic acid 2-adamantyl ester tricyclo[3.3.1.1~3,7~]dec-2-yl 2-methylprop-2-enoate 2-ADAMANTYL METHACRYLATE [133682-15-2] C14H20O2 FW220.31 |
| CAS | 133682-15-2 |
| InChI | InChI=1/C14H20O2/c1-8(2)14(15)16-13-11-4-9-3-10(6-11)7-12(13)5-9/h9-13H,1,3-7H2,2H3 |
2-ADAMANTYL METHACRYLATE - Physico-chemical Properties
| Molecular Formula | C14H20O2 |
| Molar Mass | 220.31 |
| Density | 1.07 |
| Boling Point | 296℃ |
| Flash Point | 120℃ |
| Vapor Presure | 0.001mmHg at 25°C |
| Refractive Index | 1.518 |
2-ADAMANTYL METHACRYLATE - Introduction
2-adamantyl-methacrylate (2-isobutyl methacrylate,IBMA) is an organic compound with the chemical formula C9H16O2.
The following are some of the properties and uses of 2-adamantyl-methacrylate:
Nature:
-Appearance: colorless liquid
-Density: Approximately 0.874 g/mL
-Boiling point: about 164-165°C
-Flash Point: Approximately 58°C
-Solubility: Soluble in organic solvents such as alcohol, ether and acetic acid
Use:
-2-Adamantyl-methacrylate is widely used as a component of a monomer or copolymer of a resin. It can be copolymerized with other monomers such as methyl methacrylate (MMA) to prepare polymer materials with good weather resistance and chemical corrosion resistance, such as coatings, adhesives and plastics.
-The compound is also used in fluorescent marking, textile coatings and other applications such as electronic and optoelectronic devices.
Preparation Method:
-2-adamantyl-methacrylate can be prepared by esterification of adamantanol and methyl methacrylate in the presence of an acid catalyst.
Safety Information:
-2-adamantyl-methacrylate is irritating and should be avoided in contact with skin and eyes.
-During use and storage, care should be taken to prevent it from contacting fire and high temperature.
-It may also cause harm to the water environment and should not be discharged into the water body.
Since the characteristics and safety of chemical substances may vary with the manufacturer and specific conditions of use, please refer to the detailed safety technical instructions provided by the laboratory or manufacturer when using.
The following are some of the properties and uses of 2-adamantyl-methacrylate:
Nature:
-Appearance: colorless liquid
-Density: Approximately 0.874 g/mL
-Boiling point: about 164-165°C
-Flash Point: Approximately 58°C
-Solubility: Soluble in organic solvents such as alcohol, ether and acetic acid
Use:
-2-Adamantyl-methacrylate is widely used as a component of a monomer or copolymer of a resin. It can be copolymerized with other monomers such as methyl methacrylate (MMA) to prepare polymer materials with good weather resistance and chemical corrosion resistance, such as coatings, adhesives and plastics.
-The compound is also used in fluorescent marking, textile coatings and other applications such as electronic and optoelectronic devices.
Preparation Method:
-2-adamantyl-methacrylate can be prepared by esterification of adamantanol and methyl methacrylate in the presence of an acid catalyst.
Safety Information:
-2-adamantyl-methacrylate is irritating and should be avoided in contact with skin and eyes.
-During use and storage, care should be taken to prevent it from contacting fire and high temperature.
-It may also cause harm to the water environment and should not be discharged into the water body.
Since the characteristics and safety of chemical substances may vary with the manufacturer and specific conditions of use, please refer to the detailed safety technical instructions provided by the laboratory or manufacturer when using.
Last Update：2024-04-10 22:29:15
